1/2" thick Captsmatte acrylic material
Blue LED rocker switches w/ push to reset breakers
USB charger/voltmeter w/ push to reset breaker
Black oxide coated stainless steel screws
Laser engraved distressed American flag
Hole cutouts for MFDs & trimtab control
Complete and well organized dash panel wiring
2 feet harness landing on terminal blocks
Switch backlight dimmer module installed on the back of the panel
3/8" thick gloss black acrylic panel material
Laser etched text and logo w/ RGB backlighting
ROKK active wireless phone charger
Hole cutouts for GPS displays, switches, autopilot, vhf, and throttle
Design concept
Cardboard template sent in by the customer
Panel sketch provided by the customer for design reference.
Life-like design rendering sent to customer for approval. All dimensions were carefully verified to meet the specifications required by customer.
Port Panel
Starboard Panel
Up-close look on the backlit Push Button Switches
Up-close look on the RPM Gauge and Voltmeter installed and provided by American Offshore
2-part Gloss Black Acrylic material
Completely wired push button switches with 7' wiring harness terminated with heat shrink labels and ring terminals
Laser etched Contender Logo & Text labels are backlit with RGB LEDs controlled from phone
Stereo, VHF, RPM Gauge and Voltmeter are provided and installed by American Offshore
Hole cutout for the GPS
Life-like detailed design sent to customer for approval. All dimensions were carefully verified to meet the specifications required by customer.
The paper template sent in by the customer for American Offshore to duplicate.
The design emailed to customer for approval. All dimensions were carefully verified to meet the specifications required by the customer.
4-part Gloss Black acrylic material.
Bluewater 22mm stainless steel pushbutton switches, Blue LED rocker switches w/ push to reset breakers for the trim tabs, 12v charging socket and ROKK active wireless charger. Complete switch panel wiring harness.
Pursuit logo & switch text labels all backlit with RGB LEDs controlled from an app on their phone.
Hole cutouts for all components, gauges, GPS displays, auto pilot controller, VHF & stereo.
Design sent to customer for approval. All dimensions were carefully verified to meet the specifications required by the customer.
Electronics Dash Panel.
Switch Panel.
Switch Panel from side view.
Up-close look of the Contender Logo
Up-close look of the personalized customer logo
Nighttime look with the backlight on.
Up-close look of the backlit logos
2-part Gloss Black acrylic material.
Contender & a personalized customer logo are backlit with RGB LEDs controlled from phone. Complete with positive and negative backlight wiring leads terminated with heat shrink labels and ring terminals .
Hidden Studs installed at the back for cleaner look around the panel edge without any fasteners visible in front of the dash.
Laser Etched Switch Labels.
Hole cutouts for all components, switches, breakers, stereo, radio and displays.
Panel sketches provided by the customer for design reference.
Design sent to customer for approval. All dimensions were carefully verified to meet the specifications required by customer.
Up close look at the hidden studs installed on backside of panel.
Old dash panel shipped in by customer for duplication within 1/16”.
Design sent to customer for approval. All dimensions were carefully verified to match the old panel shipped in by the customer.
Nighttime versus daytime comparison.
Up close look at the hidden studs installed on backside of panel.
CaptsMatte acrylic material.
Black pushbutton switches w/ complete panel wiring harness.
AnglerPro logo & switch text is backlit with RGB LEDs controlled from phone.
Design sent to customer for approval. All dimensions were carefully verified to meet the specifications required by customer.
Complete panel wiring harness wired to fuse block.
Complete panel wiring harness wired to terminal block.
Design sent to customer for approval. All dimensions were carefully verified to meet the specifications required by the customer.
The design was printed to scale by the customer to verify panel dimensions.
Complete panel wiring harness wired to fuse block and terminal block.
3-part Gloss Black acrylic material.
Stainless steel pushbutton switches w/ complete panel wiring harness.
Regulator logo & switch text is backlit with RGB LEDs controlled from phone.
Hole cutouts for all components, cup holders, and wireless phone charger.
Raised lip edge on horizontal panel.